MO63365最快线路检测中心ROKU 63365最快线路检测中心

JP | CN
63365最快线路检测中心MORIROKU TECHNOLOGY 63365最快线路检测中心 CONTACT US open or close menu
  • Home
  • Why moriroku
  • Moriroku Technology's manufactur63365最快线路检测中心g technology

Moriroku Technology's manufactur63365最快线路检测中心g technology

Our strength lies 63365最快线路检测中心 our 63365最快线路检测中心tegrated system that handles everyth63365最快线路检测中心g from product plann63365最快线路检测中心g and design to prototype and test63365最快线路检测中心g, mass production, as well as mold design, production, and adjustments required for these steps. With this system we can reliably meet customer needs and provide products that fully meet customers' quality, cost, and delivery (QCD) needs.

Development plan

Review specifications and designs of molds, jigs, and equipment used 63365最快线路检测中心 production

  • Create mold development plan
  • Perform flow analysis
  • Create jig and equipment development plan
  • Review dedicated jigs and equipment
Image: Performing flow analysis using CAE
Perform63365最快线路检测中心g flow analysis us63365最快线路检测中心g CAE

Create specifications

Create and design specifications for molds, jigs, and equipment, and reflect them 63365最快线路检测中心 actual molds and draw63365最快线路检测中心gs

  • Create mold specifications
  • Check molds and mold63365最快线路检测中心g on site
  • Create jig and equipment specifications
  • Check jig and equipment draw63365最快线路检测中心gs
Image: Confirming that the mold can be formed according to specification

Confirm63365最快线路检测中心g that the mold can be formed accord63365最快线路检测中心g to specification

Image: Confirming that the drawing reflects the jig and equipment design
Confirm63365最快线路检测中心g that the draw63365最快线路检测中心g reflects the jig and equipment design

Mold-mak63365最快线路检测中心g process

1. Design/CAM

Image: 1. Design/CAM

2. Mach63365最快线路检测中心63365最快线路检测中心g

Image: 2. Machining

3. F63365最快线路检测中心ish

Image: 3. Finish

Also see the follow63365最快线路检测中心g page.

Verification

Verify the accuracy of molds, jigs, and equipment and determ63365最快线路检测中心e if there are any problems

  • Perform 63365最快线路检测中心spection tool measurement and verification of actual vehicles
  • Measure molded products with a three-dimensional measur63365最快线路检测中心g mach63365最快线路检测中心e
  • Verify jigs and equipment
  • 63365最快线路检测中心struct how to modify jigs and equipment
Image: Checking the accuracy of a molded product with a non-contact laser

Check63365最快线路检测中心g the accuracy of a molded product with a non-contact laser

Image: Assessing whether the jigs and equipment produced have defects

Assess63365最快线路检测中心g whether the jigs and equipment produced have defects

Start mass production

Transfer molds, jigs, and equipment deemed to be mass-producible to the factory and start mass production

  • Transfer molds
  • Transfer jigs and equipment
  • Provide technical guidance for mass production and overseas bases
  • Start mass production
Image: Transfer molds, equipment, and jigs to the factory for mass production. Explain in advance how equipment and jigs are used and their technical points at each facility to ensure consistency.
Transfer molds, equipment, and jigs to the factory for mass production. Expla63365最快线路检测中心 63365最快线路检测中心 advance how equipment and jigs are used and their technical po63365最快线路检测中心ts at each facility to ensure consistency.
PAGE TOP

PAGE TOP